MDD093D-N-030-N2M-110GL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
41 Seconds
The Bosch Rexroth Indramat MDD093D-N-030-N2M-110GL2 is a motor for digital drive controllers from the MDD Synchronous Motors series. It features a continuous torque at standstill of 24.0 Nm, a nominal speed of 3000 rpm, and an integrated multiturn absolute encoder. The motor comes with a plain shaft, a 110 mm centering diameter, and a holding brake with 22 Nm torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-030-N2M-110GL2 synchronous motor is produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for digital drive controllers and supplies rotary motion for industrial automation axes such as gantries, packaging machines, and material-handling modules. The model pairs with compatible drives through a plug-in connector, and its design combines feedback and braking functions in one housing. In closed-loop motion systems, this arrangement helps the controller regulate torque, speed, and position during indexing and continuous-running tasks across automated production equipment.
At standstill, the motor can deliver 24.0 Nm of continuous torque. Its D-length stator and 093 frame provide greater copper volume than shorter versions. Position data is captured by an integrated multi-turn absolute encoder, allowing the drive to recover the shaft angle after power cycles without an external homing routine. For load securing, the motor is supplied with a blocking brake that clamps the rotor mechanically; when engaged, it can hold up to 22 Nm. Speed and position signals travel over digital servo feedback (DSF) lines, allowing fast closed-loop response without analog conversion stages.
During installation, the power and feedback plugs are oriented to the left, which can simplify cable routing when neighboring components are mounted close together. A cylindrical pilot diameter of 110 mm centers the housing against the machine plate, and the standard balanced rotor supports smooth operation up to 3000 rpm. The motor uses a plain shaft with a factory-installed shaft seal to reduce coolant ingress. The connector-style termination avoids loose flying leads, and the standard cast housing is suitable for normal shop contamination without added protective sleeves.
Frequently Asked Questions about MDD093D-N-030-N2M-110GL2:
Q: What type of encoder is included with the MDD093D-N-030-N2M-110GL2 motor?
A: This motor features an integrated multiturn absolute encoder for precise position feedback.
Q: What is the holding brake torque of the MDD093D-N-030-N2M-110GL2?
A: The holding brake on this model provides a torque of 22 Nm for secure holding at rest.
Q: What is the connection direction of the MDD093D-N-030-N2M-110GL2 motor?
A: The connection for this motor is configured to the left, facilitating specific installation requirements.
Q: What continuous torque at standstill does the MDD093D-N-030-N2M-110GL2 provide?
A: This model offers a continuous torque at standstill of 24.0 Nm, enabling stable performance during extended operation.
Q: Does the MDD093D-N-030-N2M-110GL2 motor include a shaft seal?
A: A standard shaft seal is included, offering additional protection against contaminants at the shaft exit.
