Product Description:

The MDD093D-N-030-N2M-110GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat and grouped within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into precise rotary motion that can be used for positioning, speed regulation, or coordinated moves inside automated machinery. This operating profile makes it suitable for axes that require repeatable motion during indexing, transfer, and other synchronized machine sequences.

This model follows standard dynamic balancing and uses a centering diameter of 110 mm for repeatable alignment when it is mounted to a machine frame. At standstill, it can deliver a continuous torque of 24.0 Nm, giving the motor enough output for heavily loaded axes without requiring added reduction in every application. An integrated blocking brake provides a static braking capacity of 11 Nm to hold vertical or suspended loads when power is removed. During normal operation, the rotor reaches a nominal speed of 3000 rpm, which suits common industrial motion-control duty. All power and feedback conductors exit on the left side, and the motor uses length code D within this frame size.

Position feedback is transmitted through Digital servo feedback (DSF), allowing the controller to close torque, velocity, and position loops with high resolution. Absolute rotor angle is detected by an integrated multiturn absolute encoder, so the axis can retain position information through power cycles. The output is delivered through a plain shaft with a factory-installed shaft seal, while the non-drive end has no secondary shaft extension. The motor also uses a connector-based power interface, which keeps the electrical connection points compact at the housing and supports orderly cable routing.