Product Description:

The MDD093D-N-030-N2M-110GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it forms the electromechanical link between a regulated power stage and the machine axis, delivering programmable torque and velocity essential for automated packaging, handling, and machining stations. Its design supports precise feedback and quick response demanded by fast-cycle equipment in applications that require accurate motion control.

Under rated thermal conditions, the motor sustains 24.0 Nm of continuous torque at standstill, enabling it to hold substantial loads without overheating. When energized by a matched drive, it reaches a nominal speed of 3000 rpm, aligning rotor frequency with controller commands for constant process speed. The rotor is balanced to the standard grade, and the 093 frame size provides a centering diameter of 110 mm for accurate flange mounting. Power and feedback lines couple through a connector interface, and a plain shaft simplifies coupling to gearboxes or pulleys while minimizing axial play.

The power and signal connector is oriented on the left side of the housing, aiding cable routing in tight cabinets. Motor length code D gives the stator added axial depth, and the housing is supplied in the standard form factor to match existing MDD flanges. The motor has a shaft seal that blocks coolant or lubricant ingress at the output journal, yet the design intentionally ships without a blocking brake, so external clamping or drive torque must secure the load during power-off. Command feedback is handled through digital servo feedback, which sends high-resolution position data to the drive, while the shaft end is standard with no side-B extension to keep the footprint compact.