Product Description:

The MDD093D-N-030-N2M-110GB2 is a servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is supplied as a motor for digital drive controllers, where it converts regulated current from the drive into mechanical rotation for positioning and velocity tasks in industrial automation cells. Its synchronous design supports precise axis motion in systems that require controlled speed and position response.

For mechanical loading at zero speed, the motor provides a continuous standstill torque of 24.0 Nm, allowing it to hold loads without external gearing. Its nominal speed is 3000 rpm, so the drive can support common high-speed positioning and velocity applications. Alignment to adjacent machinery is simplified by a centering diameter of 110 mm. Power and feedback cabling leave the unit on side B through a sealed connector interface, which keeps the connection enclosed and supports compact cable routing. The motor uses an integrated multi-turn absolute encoder that delivers absolute shaft position over multiple revolutions, allowing motion to resume after a power cycle without a homing sequence. Rotor balancing is standard, and the D motor length with frame size 093 indicates a longer stator stack for this housing size.

A blocking brake rated at 22 Nm is fitted, so vertical axes can remain stationary when the drive is disabled. Position data is also routed through the motor's Digital servo feedback (DSF) channel, giving real-time incremental and commutation signals to the controller. The mechanical interface uses a plain shaft and is fitted with a shaft seal to help limit contaminant entry around the output end. Because the shaft end on side B is omitted, coupling components mount only on the drive end, and the standard housing helps protect the windings from ordinary shop dust.