Product Description:

The MDD093D-N-030-N2M-110GB1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed to work with digital drive controllers, it supplies regulated rotary motion for indexing tables, packaging axes, and similar automation points where repeatable speed and position are mandatory. It is intended for machine axes that require stable response during acceleration, deceleration, and holding operation. In closed-loop systems, the motor converts commanded current into predictable shaft motion for positioning and speed-controlled tasks.

At standstill, the motor delivers a continuous torque of 24.0 Nm, so it can hold loaded shafts without overheating while the control loop remains active. When driven to its rated operating point, the rotor reaches 3000 rpm, giving adequate headroom for common spindle or conveyor duties. Accurate mounting is aided by a centering flange that measures 110 mm in diameter, helping keep the stator aligned with downstream mechanics. Power and feedback cabling exit on Side B through a pinned connector, which simplifies cable removal because the harness can be detached without moving the machine frame. The plain shaft is fitted with a shaft seal, and the rotor is balanced to the standard grade so residual vibration stays within standard ISO balance classes. A standard housing with length code D adds thermal mass and supports longer duty under elevated ambient temperatures.

For power-off safety, the integrated brake generates 11 Nm of static torque, helping prevent vertical or inclined loads from drifting when current is removed. Rotor angle is tracked by an integrated multiturn absolute encoder, and speed data is returned to the drive over digital servo feedback (DSF), so the axis can restart without a reference run and maintain accurate closed-loop motion. The motor uses Motor Size 093, which fits mid-range couplings, gears, and mounting hardware used in many compact machine axes. This frame size supports installation in equipment where moderate torque and controlled positioning are both required.