Product Description:

The MDD093D-N-030-N2M-110GB0 is a synchronous servo motor produced by Bosch Rexroth Indramat and part of the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into precise rotational motion for positioning and speed control in industrial automation equipment. The 093 frame size and integrated multi-turn absolute encoder let the controller obtain high-resolution position data for repeatable axis movement. This arrangement supports accurate response during indexing, feed motions, and other automated machine cycles.

At standstill the motor can deliver 24.0 Nm of continuous torque, giving adequate holding force for loaded axes without overheating. Its nominal speed reaches 3000 rpm, which suits drive controllers used in standard industrial motion systems. A centering diameter of 110 mm helps keep the motor aligned with the machine flange, and power and feedback leads exit on Side B to keep cabling away from the driven mechanics. Quick-disconnect Connector fittings simplify cable attachment and removal, while Digital servo feedback sends absolute multi-turn position data to the drive for closed-loop operation. Standard dynamic balancing also helps reduce residual vibration during high-speed cycles.

For axes that require mechanical holding during power loss, the motor is supplied without a blocking brake, so the load must be secured by an external clamp or maintained drive torque. A design with a shaft seal helps protect the bearings when dust or cutting fluids are present around the machine. The plain shaft supports common coupling styles and keeps the output end simple for direct connection to driven components. The D length code uses a longer magnetic stack than shorter versions in the same frame, which helps the motor support demanding duty cycles without changing the standard housing or connection layout.