Product Description:

The MDD093D-N-030-N2M-110GA1 is a synchronous servo motor built by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers on automated machine axes where closed-loop control is needed for stable torque and speed. This arrangement allows the motor and drive to work together for accurate positioning, repeatable motion, and controlled response under changing load conditions. Size code 093 and length code D indicate the frame and motor length used for this version, and the housing uses the standard style with heat-conductive surfaces to support thermal transfer during operation.

The motor supplies a continuous standstill torque of 24.0 Nm, allowing it to hold or slowly index loads without overheating during sustained low-speed duty. Under rated excitation it reaches a nominal speed of 3000 rpm, which suits many production axes that need steady operation across a broad control range. Position data comes from an integrated multi-turn absolute encoder, and rotational feedback is transmitted through digital servo feedback (DSF) so the controller can correct deviation during each commutation cycle. A centering diameter of 110 mm helps align the flange on precision mounting faces, while standard rotor balancing helps reduce added vibration in connected mechanisms.

An integrated blocking brake produces 11 Nm of torque to secure vertical or suspended loads when the drive is disabled. Its power leads exit on Side A, which can simplify cable routing where cabinet entry points are arranged on that side of the machine. The motor uses a plain shaft for coupling attachment, and a shaft seal helps limit lubricant migration toward internal components. The shaft end is the standard single-ended style, and the molded connector supports plug-in connection of power and feedback cables.