Product Description:

The MDD093D-N-030-N2M-110GA0 is a servo motor from the MDD Synchronous Motors series produced by Bosch Rexroth Indramat. It is used with digital drive controllers to convert regulated AC current into precise rotary motion for material handling, packaging, and general positioning axes in industrial automation. The motor combines feedback functions with a mounting geometry that supports accurate alignment to the machine. This arrangement helps the connected drive maintain stable speed control and repeatable positioning during coordinated multi-axis operation.

The motor delivers a continuous standstill torque of 24.0 Nm, which supports holding force and low-speed motion without excessive heat buildup. Its nominal speed reaches 3000 rpm, making it suitable for mid-range automation cycles that require a broad operating speed range. A centering diameter of 110 mm positions the housing accurately on mounting flanges, and standard dynamic balancing helps reduce vibration during high-speed operation. Position data are generated by the integrated multi-turn absolute encoder and returned through digital servo feedback (DSF). This feedback arrangement preserves position information over multiple revolutions and allows the controller to recover motion status after a power interruption.

Electrical power and signal lines are routed through a connection on side A, which helps simplify cable routing where machine clearances are limited. The unit is supplied without a blocking brake, so holding force at standstill must be provided by the drive or by external mechanical retention. A design with a shaft seal helps protect the bearing area from dust and coolant splash, while the plain shaft supports couplings or pulleys that do not require a keyway. The D-length frame and standard housing support installation where axial space is limited, and the absence of a side B shaft end leaves the rear of the motor clear for compact machine layouts.