Product Description:

The MDD093D-N-030-N2L-130PR2 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into position-correct rotational motion for industrial axes that require high repeatability. The unit is supplied with a standard housing and standard rotor balancing, making it suitable for applications that depend on stable motion behavior during repeated cycles. Its synchronous design supports precise speed control and accurate positioning in automated machinery.

At standstill, the motor can deliver a continuous torque of 24.0 Nm, allowing sustained force on static loads without overheating. During normal operation, it reaches a nominal mechanical speed of 3000 rpm, which suits a wide range of servo-driven axis movements. Position and velocity are reported by the integrated Digital servo feedback (DSF) device, which sends high-resolution signals to the controller for closed-loop regulation. A blocking brake is fitted, and its holding capability is rated at 22 Nm, so vertical axes can remain stationary when power is removed. Torque is transferred through a shaft with a keyway, which helps maintain secure coupling under reversing loads. A shaft seal is also present to help limit the ingress of dust or coolant.

The centering pilot measures 130 mm, establishing concentric alignment between the motor flange and adjoining machinery. Power and feedback conductors exit on the right side through a coded connector, which keeps the cable layout consistent inside multi-axis equipment. This version carries the length code D and belongs to motor size 093, giving it a longer active stack within that frame format. The shaft is supplied without a side-B extension, which leaves the opposite end free of an additional output feature. The standard housing, shaft seal, and blocking brake support use in enclosed machine installations where protected motor surfaces are important.