Product Description:

The MDD093D-N-030-N2L-130PR1 is a synchronous motor in the MDD Synchronous Motors series from Bosch Rexroth Indramat. It is supplied for use with digital drive controllers and is intended for positioning tasks and cyclic duty in industrial automation cells. In operation, the motor converts controlled electrical input into precise rotary motion for axes that must start, stop, and repeat movement accurately. The motor uses the standard housing format for the series, with standard balancing and a standard shaft end. A factory-installed blocking brake is included for controlled stopping when power is removed, and the single-ended shaft is fitted with a seal to help limit fluid ingress during continuous operation.

This unit can hold a continuous standstill torque of 24.0 Nm, allowing the drive to maintain load without thermal overload during static machining, clamping, or dwell periods. During acceleration or when the axis must remain in place after power loss, the brake can provide up to 11 Nm of holding torque to resist unwanted movement. The motor reaches a nominal speed of 3000 rpm, which suits the operating range used by many compatible Indramat controllers. Mounting accuracy is supported by a centering diameter of 130 mm, helping the flange seat correctly against a gearbox or machine plate. Power and feedback conductors exit on the right side, which can simplify cable routing when the cable path is arranged on that side of the machine.

The motor uses length code D, giving it a longer active stack while retaining frame size 093. Feedback is provided by integrated digital servo feedback, allowing the controller to monitor rotor position and speed throughout each control cycle. This closed-loop feedback helps the drive correct small tracking errors during speed changes and load disturbances. The output shaft uses a keyway to transmit torque securely to the driven load.