Product Description:

The MDD093D-N-030-N2L-130PL2 is a servo motor manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts controlled electrical energy into precise rotary motion for positioning, feed, and spindle axes in automated machinery. The model uses a standard housing and a standard balancing class so that it can be mounted in general-purpose equipment without additional vibration treatment. Its 093 frame size integrates into modular drive platforms that demand accurate torque regulation. This layout makes the motor suitable for machine axes that require repeatable motion, stable speed control, and consistent response during changing load conditions.

At the core of the unit, a continuous standstill torque of 24.0 Nm allows the axis to hold static mechanical loads while energized without exceeding thermal limits. Under rated voltage and frequency, the rotor reaches a nominal speed of 3000 rpm, giving consistent throughput in high-cycle applications. Mounting alignment is assisted by a centering pilot of 130 mm, providing concentric seating in motor flanges. Closed-loop operation is supported through digital servo feedback that transmits position data to the drive, enabling fine velocity tuning and automatic correction for load disturbances. This feedback arrangement helps the connected controller maintain smooth motion during acceleration, deceleration, and steady-state operation.

For secure stopping when power is removed, the integrated blocking brake develops a holding torque of 22 Nm. Power, signal, and brake lines exit through left-side connections, and this arrangement uses a sealed connector to minimize wiring bends inside the cabinet. A dedicated shaft seal protects the bearing set from coolant splash or airborne particulates during continuous duty. Torque is delivered through a keyway shaft that mates with standard hub clamping elements, and the design omits a side-B shaft end to simplify guards. The overall axial dimension follows the motor length code D, which gives this frame a longer housing for the associated active parts. These features support use in enclosed industrial equipment where reliable cable routing, shaft protection, and secure load holding are important.