Product Description:

The MDD093D-N-030-N2L-130PL1 belongs to the MDD Synchronous Motors series produced by Bosch Rexroth Indramat. It is a motor for digital drive controllers that supplies cyclic torque to axes requiring precise velocity and position control within automated machinery. The unit matches size 093 frames and uses length code D, giving it an elongated active stack that raises continuous output. Standard rotor balancing keeps vibration within ISO limits, and the housing style is standard. An integrated blocking brake holds the shaft when the drive is disabled, which helps the motor remain stable during vertical operation, pauses, or controlled stopping sequences.

This motor delivers a continuous standstill torque of 24.0 Nm, allowing it to hold static loads without exceeding thermal limits. At rated operation, it reaches a nominal speed of 3000 rpm for synchronous motion with a matching controller. Position accuracy is refined by digital servo feedback, which sends high-resolution rotor angle data to the drive for closed-loop control. The centering diameter of 130 mm aligns the flange to machine plates and helps keep the motor concentric with the driven mechanics. A keyway shaft transmits torque through positive engagement couplings, which is useful in applications with frequent starts, stops, and direction changes.

The power and feedback plugs exit on the left side, and a detachable connector allows the cable to be disconnected without disturbing machine alignment. The blocking brake develops 11 Nm of static holding torque, which is suitable for loads that match the motor’s continuous rating. A durable shaft seal guards the front bearing against coolant splash and fine dust, while the single-ended shaft design eliminates an unused side B extension to save space. This arrangement is useful where surrounding machine frames, covers, or guarding leave limited room around the motor body.