Product Description:

The MDD093D-N-030-N2L-130PL0 is a synchronous servo motor produced by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. Developed for use with digital drive controllers, the unit converts electrical commands into regulated rotary motion for tasks such as indexing, contour following, and coordinated axis control in automated equipment. Its mechanical design follows the 093 frame class, and the product relies on connectorized power and feedback interfaces to speed installation in multi-axis machinery.

At standstill the motor can supply a continuous torque of 24.0 Nm, enabling it to hold loads firmly while the drive maintains position control. Its nominal operating velocity reaches 3000 rpm, a speed that aligns with common inverter frequencies and allows rapid cycle execution in packaging or material-handling stations. Position, speed, and commutation data are returned through Digital servo feedback (DSF); this serial interface transmits high-resolution encoder values to the controller for tight closed-loop regulation. A centering shoulder sized at 130 mm locates the housing precisely on mounting plates, which reduces concentricity error during assembly. All electrical terminations exit on the left side of the stator, so cable routing remains consistent when several axes are arranged in parallel within one cabinet.

The rotor is finished to Standard balancing, limiting vibration levels and protecting adjacent bearings when the shaft accelerates toward maximum speed. Frame length is identified as Motor Length Code D; the extended lamination stack raises electromagnetic torque density without altering the outside diameter. Because the unit ships without a blocking brake, any vertical load must be secured by an external clamp or by the drive’s torque-holding function during power loss. A circumferential shaft seal is fitted at the front end to keep lubricants in and prevent coolant or dust from entering the motor interior during washdown or airborne-particulate exposure.