Product Description:

The Bosch Rexroth Indramat MDD093D-N-030-N2L-130PB1 belongs to the MDD Synchronous Motors series and is classified as a motor for digital drive controllers. Within an automation cell, it connects to a regulated inverter, accepts commanded current, and returns position data so linear or rotary axes stay on target in automated machinery. The standard housing and integrated blocking brake let the unit hold a load when power is removed, while the 093 frame size and D-length stator provide a higher torque option without changing the mounting pattern.

The motor delivers a continuous standstill torque of 24.0 Nm, allowing the shaft to resist static loads without overheating. Once energized, the rotor can reach a nominal speed of 3000 min⁻¹. Accurate mechanical alignment is achieved through a centering diameter of 130 mm, which references the flange to the machine frame. When motion stops, the blocking brake supplies 11 Nm of holding torque to secure vertical or driven axes. Rotor angle is reported through digital servo feedback, giving the drive high-resolution status for closed-loop commutation. Cabling is routed through a sealed connector, and the housing remains standard.

Cable exits are oriented on Side B, which keeps power and feedback conductors away from moving tooling on side A. The rotor uses standard balancing, which reduces residual vibration at full speed and helps limit bearing load. A protective shaft seal is fitted to limit dust or coolant entry along the shaft interface. The drive side uses a keyway shaft so torque can be transmitted through a simple hub. The opposite end has no second shaft extension, and the D length with the 093 frame increases the active lamination stack without increasing the outside diameter, which helps preserve the same flange envelope for machine installation.