MDD093D-N-030-N2L-130GR2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
55 Seconds
The Bosch Rexroth Indramat MDD093D-N-030-N2L-130GR2 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. This motor features a continuous torque at standstill of 24.0 Nm and a nominal speed of 3000 rpm. It has a centering diameter of 130 mm, comes with a plain shaft and shaft seal, and includes a holding brake with 22 Nm torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-030-N2L-130GR2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers and supports closed-loop axis control in automated machinery where accurate torque and velocity response are required. In operation, the motor converts commanded current into controlled rotary motion so an axis can accelerate, decelerate, and hold position with repeatable behavior. This makes it suitable for positioning duties in packaging equipment, transfer systems, and other industrial motion applications that rely on stable servo performance.
The motor delivers a continuous standstill torque of 24.0 Nm, allowing it to hold or slowly move loads without overheating during low-speed operation. Its nominal operating speed is 3000 rpm, which suits indexing tables, packaging lines, and similar equipment that requires a broad usable speed range. A centering diameter of 130 mm aligns the housing on mounting flanges for accurate installation and stable mechanical fit. Power and feedback are routed through a connector on the right side, which can simplify cable routing in machine layouts with limited space around the motor. Position data is returned through digital servo feedback (DSF), allowing the controller to process fine angle information for responsive closed-loop motion.
An integrated blocking brake delivers up to 22 Nm of static holding torque when power is removed, which is useful on vertical axes or applications that must remain in position at standstill. The motor includes a shaft seal, which supports installation in areas where dust or sprayed lubricants may be present. Its plain shaft works with clamping hubs or keyless bushings, and the single-sided shaft end helps keep the mechanical arrangement compact. The longer stack is identified by the motor length code D, which adds rotor mass for applications that benefit from higher inertia matching. The motor also uses a standard housing and general-purpose mechanical layout, making it suitable for a wide range of machine designs.
Frequently Asked Questions about MDD093D-N-030-N2L-130GR2:
Q: What is the continuous torque at standstill for the MDD093D-N-030-N2L-130GR2 motor?
A: The MDD093D-N-030-N2L-130GR2 motor provides a continuous torque of 24.0 Nm at standstill.
Q: Does the MDD093D-N-030-N2L-130GR2 include a holding brake, and what is its torque?
A: This model is equipped with a blocking brake that offers a holding brake torque of 22 Nm.
Q: What type of motor feedback does the MDD093D-N-030-N2L-130GR2 utilize?
A: Digital servo feedback (DSF) is used for precise position feedback on this motor.
Q: What is the nominal speed of the MDD093D-N-030-N2L-130GR2 synchronous motor?
A: The nominal speed for this motor is rated at 3000 min⁻¹.
Q: What is the connection direction and type for the MDD093D-N-030-N2L-130GR2 motor?
A: The electrical connection is positioned to the right and uses a standard connector.
