Product Description:

The MDD093D-N-030-N2L-130GR0 is an AC synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts regulated DC bus energy into mechanical rotation for industrial axes that require accurate positioning. The 093 frame size remains compact even with its extended D-length stator, making it suitable for packaging lines, printing presses, and material-handling gantries where repeatable velocity control is important.

This model delivers a continuous standstill torque of 24.0 Nm, allowing the drive to hold loads without excessive heating. Under running conditions, the rotor reaches a nominal speed of 3000 rpm, which suits high-speed motion profiles in automated equipment. Rotor position is reported through digital servo feedback, helping the control loop remain stable during acceleration and deceleration. Installation is supported by a 130 mm centering diameter that mates directly with standard machine flanges. The motor is supplied without a blocking brake, so any gravity-loaded axis must rely on external holding force or drive torque when the system is stopped. A front shaft seal helps keep lubricant in place while limiting the entry of process liquids, and the standard cast aluminum housing supports convection cooling.

Electrical connections are made through a connector oriented to the right, which helps route cable bundles alongside the machine wall. Output torque is transmitted through a plain shaft, and the shaft end is standard, so there is no secondary extension on side B. Within the MDD family, this model has a length designation of D, which indicates an extended active core that increases thermal capacity without increasing the motor diameter. The rotor is balanced to a standard grade, which helps reduce residual vibration during operation at higher speeds.