MDD093D-N-030-N2L-130GL1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
3 Seconds
The Bosch Rexroth Indramat MDD093D-N-030-N2L-130GL1 is a motor from the MDD Synchronous Motors series designed for digital drive controllers. It has a continuous torque at standstill of 24 Nm, a nominal speed of 3000 rpm, and features a holding brake with an 11 Nm torque. This model comes with a centering diameter of 130 mm, a plain shaft with shaft seal, and digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-030-N2L-130GL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for use with digital drive controllers in automated machinery. It belongs to the MDD Synchronous Motors series and serves as a rotary actuator that converts drive output current into controlled mechanical motion for positioning and speed-regulated tasks on production lines. This type of motor is commonly used on feed axes, transfer units, and other machine functions that require accurate response to commanded speed and position changes during repeated operating cycles. It can also support applications where compact integration with a matching digital controller is preferred in space-conscious machine layouts.
This model produces a continuous standstill torque of 24.0 Nm, supplying steady force for holding or low-speed indexing without thermal overload. During rated operation, it reaches a nominal speed of 3000 rpm, which supports fast motion profiles on compatible drive systems. Mechanical alignment is simplified by a centering diameter of 130 mm, allowing the flange to seat accurately against standard mounting faces. Power and feedback conductors exit on the left side through a cylindrical connector, providing plug-in attachment and helping keep cable bends clear of nearby machine structures. This arrangement keeps the connection point on one side of the housing, which can simplify installation where surrounding components leave limited routing space.
A blocking brake rated at 11 Nm secures the rotor when power is removed, helping prevent back-driving on vertical or suspended axes. Position data is returned through digital servo feedback (DSF), allowing the controller to close the loop on shaft rotation during normal operation. Contaminant ingress is limited because the output end is built with a shaft seal, and the load interface uses a plain shaft for coupling without a keyway. The motor also uses standard housing geometry and standard dynamic balancing, which help maintain smooth operation in typical machine installations. It has a single-ended shaft design without a side B extension, leaving the non-drive end compact for use with gearheads, pulleys, and other direct-coupled machine elements found in industrial automation.
Frequently Asked Questions about MDD093D-N-030-N2L-130GL1:
Q: What is the continuous torque at standstill for the MDD093D-N-030-N2L-130GL1 motor?
A: This model provides a continuous torque of 24.0 Nm at standstill, ensuring steady power output during operation.
Q: Does the MDD093D-N-030-N2L-130GL1 motor include a holding brake, and what is its torque?
A: The MDD093D-N-030-N2L-130GL1 is equipped with a holding brake that delivers 11 Nm of torque.
Q: What type of motor feedback does the MDD093D-N-030-N2L-130GL1 provide?
A: Digital servo feedback (DSF) is used for motor feedback on this model.
Q: What is the connection direction and type for the MDD093D-N-030-N2L-130GL1 motor?
A: The connection for this motor is positioned to the left side and uses a connector type interface.
Q: What kind of shaft is standard on the MDD093D-N-030-N2L-130GL1 motor?
A: This motor features a plain shaft with a shaft seal for added protection against contaminants.
