Product Description:

The MDD093D-N-030-N2L-130GL0 is a synchronous servo motor built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into mechanical rotation for positioning axes in automated machines, conveyors, and packaging lines. It uses the standard housing style and balancing grade used in this motor line, which helps maintain smooth running during repetitive motion. Its plain shaft can be coupled directly to timing belts or rigid couplings for cyclic start-stop duty. This arrangement suits equipment that needs repeatable acceleration, controlled settling, and dependable motion over frequent operating cycles.

At standstill, the motor delivers 24.0 Nm of continuous torque, which helps support loads during dwell periods and low-speed holding conditions. Under rated excitation, it reaches a nominal speed of 3000 rpm, giving a broad operating range for positioning and conveyor tasks. Mechanical alignment is centered by a 130 mm pilot diameter, and the power and feedback leads exit on the left side of the housing. The electrical interface uses a sealed connector, which keeps the connection protected and compact. Rotor position is returned through digital servo feedback, allowing the drive controller to maintain closed-loop speed and position control during acceleration, deceleration, and steady running.

The motor is supplied without a blocking brake, so any required holding or stopping force must be provided externally when power is removed. Its length code is D, and the frame size is 093, which gives it a longer active section than shorter motors in the same platform. A fitted shaft seal helps limit lubricant migration at the output end and supports cleaner operation around the bearing area. Side B is left without shaft machining, which keeps the output arrangement simple for direct coupling. This configuration is appropriate where braking is handled elsewhere in the machine and a sealed output end is preferred.