Product Description:

The MDD093D-N-030-N2L-130GB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into precise rotary motion for positioning duties in automated machinery. Its series coding indicates a 093 frame with length code D, which places the motor in a medium-power size range for feed drives, pick-and-place units, and tool spindles. The motor is suited to applications that require frequent starts, stops, and direction changes while maintaining repeatable motion over long production cycles.

A centering diameter of 130 mm aligns the motor accurately on the machine faceplate. Standard balancing helps limit residual vibration during high-speed operation, and the rated speed of 3000 rpm supports fast axis travel where the connected drive permits it. The rotor can deliver a continuous stall torque of 24.0 Nm, which supports steady holding force at standstill and stable response under varying load. Power and feedback conductors exit on Side B through a sealed connector, which helps keep cable routing clear of the drive end in compact installations. The housing uses standard construction with a plain IEC mounting flange, so it fits common machine layouts and keeps the mechanical interface straightforward.

A blocking brake is fitted, and it can hold up to 22 Nm when the axis is de-energized to help prevent load drift on vertical or suspended axes. Position data is returned by digital servo feedback (DSF), which gives the drive the information needed for closed-loop control and accurate speed regulation. The output side uses a plain shaft, and the front bearing region is protected by a shaft seal to help resist coolant splash and fine dust. The shaft end on the opposite side is omitted, which reduces overall length and leaves more room around the non-drive end for nearby machine components.