Product Description:

The MDD093D-N-030-N2L-130GB0 is a synchronous AC servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. In automated cells, it works with a digital drive controller to generate closed-loop torque and velocity for coordinated motion of gantries, tool changers, or conveyor sections. The motor supports high-cycle positioning tasks where repeatable rotary output is required during continuous production shifts. Its synchronous design lets the drive respond quickly to command changes during indexing and speed-controlled operation.

A centering diameter of 130 mm gives the motor a fixed seating reference for flange mounting and helps maintain concentric alignment between the shaft and the driven load. Under steady-state excitation, the unit can deliver 24.0 Nm of continuous stall torque, so it can hold or accelerate medium-mass tooling without supplemental gearing in many applications. Rated speed reaches 3000 rpm, enabling direct coupling in fast indexing duties. Motion feedback is provided by integrated digital servo feedback, which returns position information to the drive for closed-loop control. Power and signal cables are oriented toward side B, which can simplify routing in rear-exit installations.

The motor has a length code D, which gives it higher thermal mass while retaining the 093 frame size. It uses a plain shaft for torque transfer, and the front bearing is protected by a shaft seal that helps keep out splash and oil mist. The design is supplied without a blocking brake, so holding torque must be provided by the drive or by an external clamp when the axis is stopped. The side-B shaft end is omitted, and power and feedback lines connect through a locked connector. Standard dynamic balancing and the standard housing support installation on adjacent machine components.