Product Description:

The MDD093D-N-030-N2L-130GA2 is a synchronous AC servo motor produced by Bosch Rexroth Indramat for use with digital drive controllers in the MDD Synchronous Motors series. It serves as the actuator stage in automated machinery by converting commanded current into rotation. This allows linear or rotary axes to follow programmed motion profiles precisely on assembly lines, packaging equipment, and machine tools.

Under continuous stall conditions, the motor delivers 24.0 Nm of torque, allowing it to hold load forces at zero speed without overheating. During motion, it reaches a nominal speed of 3000 rpm, a value that matches standard 8 kHz drive settings for rapid positioning. A blocking brake is mounted on the rear, supplying 22 Nm of holding torque so vertical axes remain fixed when power is removed. Position and velocity feedback are supplied through digital servo feedback (DSF), enabling the drive to close high-resolution control loops. To protect the bearing lubricant and prevent ingress of cutting fluids, a shaft seal is installed at the output end. The D-length frame increases active stack height relative to shorter codes, giving higher torque density while maintaining the same 093 stator diameter. The plain output shaft ships without an auxiliary shaft on side B, simplifying coupling selection.

For mechanical integration, the front flange presents a centering pilot of 130 mm and is dynamically trimmed to a standard balancing grade, so extra counterweights are unnecessary. Power and feedback conductors exit toward Side A through a right-angle industrial connector, keeping cable loops clear of moving parts. The cast-aluminum housing follows the standard cooling rib pattern, and the motor belongs to frame size 093, matching gearheads and mounting kits designed for the 100 mm bolt circle family. The plain shaft profile allows keyed or clamp couplings, and the omission of a side B shaft end reduces footprint inside compact axis modules.