Product Description:

Bosch Rexroth Indramat manufactures the MDD093D-N-030-N2L-110PR2, a synchronous servo motor in the MDD Synchronous Motors series. Intended for use with digital drive controllers, the motor converts command currents into controlled rotary motion for packaging, handling, and machining stations. A standard housing encloses the stator, and a single shaft end without an auxiliary side-B extension helps keep the overall envelope compact. The connector-based power and feedback interface simplifies wiring, while the shaft arrangement supports direct connection to common mechanical transmission elements.

The rotor can provide a continuous standstill torque of 24.0 Nm, which indicates the motor’s continuous load capability when the shaft remains energized but stationary. During operation, the motor reaches a nominal speed of 3000 rpm, giving the connected drive a practical speed range for many servo axes. A blocking brake mounted on the rear frame supplies 22 Nm of holding torque, which helps keep vertical or suspended loads in place when drive power is removed. Alignment to connected equipment is supported by a centering diameter of 110 mm, and the output uses a keyway shaft so torque can be transferred securely to pulleys, couplings, or gearboxes. This combination of torque, speed, and mounting features suits machinery that needs repeatable motion and stable mechanical positioning.

Position feedback is provided through digital servo feedback (DSF), allowing the drive to monitor rotor position directly for closed-loop operation. The motor has a length code of D, which indicates a longer housing within this frame size. Power and signal connectors exit on the right side, which can help keep cable routing orderly when several axes are installed next to one another. The motor also includes a shaft seal to help limit the entry of contaminants and reduce lubricant migration at the output end. Standard balancing is used for the rotating assembly so vibration remains controlled during normal operation.