Product Description:

The MDD093D-N-030-N2L-110PR0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is supplied as a motor for digital drive controllers and is intended to deliver precise, closed-loop rotary motion in automated machinery such as packaging lines, gantry axes, and material-handling stations. A keyed shaft end and a standard housing support straightforward coupling to pulleys or gears.

The unit can maintain a continuous standstill torque of 24.0 Nm, allowing it to support static loads while position control is active. It has a nominal operating speed of 3000 rpm, so the paired drive must support that rated speed range. A centering diameter of 110 mm aligns the flange accurately with machine frames, helping to minimize runout. Power, feedback, and brake conductors exit on the right side, which can simplify cable routing when multiple motors share a common cable tray. A connector interface simplifies installation and reduces wiring errors, while digital servo feedback provides high-resolution position data so the controller can maintain tight speed and torque loops. The shaft seal helps keep contaminants away from the bearing area, and the rotor is balanced to a standard grade to reduce vibration during high-speed cycles.

The physical configuration uses motor length code D, which pairs an extended stator with the 093 frame to raise power density without changing the mounting footprint. Frame size 093 sets the overall diameter class used throughout the MDD family. The motor is built without a blocking brake, so applications that need power-off holding force must use an external clamp or rely on drive torque. The integrated shaft seal helps keep lubricants in place and reduces contaminant entry when the motor is installed in oil-splash areas.