Product Description:

The MDD093D-N-030-N2L-110PL2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for integration with digital drive controllers, where commanded current is converted into controlled torque and speed for axis positioning in automated machinery. The unit is supplied in a standard housing and uses a keyway shaft so it can be coupled to common pulleys or couplers. This arrangement makes the motor suitable for feed axes, handling systems, and other equipment that depends on repeatable motion. Power and feedback are routed through a molded connector, which helps keep cabling organized in densely packed control cabinets.

Its continuous standstill torque is 24.0 Nm, so the shaft can support static loads and low-speed indexing without overheating. During motion, the motor reaches a nominal speed of 3000 rpm, which suits typical servo applications that require fast and stable operation. The motor uses frame size 093 with length code D, which indicates a longer active stack within the same mounting format. A spring-applied brake provides 22 Nm when power is removed, and digital servo feedback reports rotor position to the controller for closed-loop operation.

Mounting precision is aided by a centering pilot of 110 mm, which helps align the motor accurately on the machine interface. The connections exit on the left side, which can simplify cable routing in layouts that require side-directed access. A fitted shaft seal helps protect the bearing area from coolant spray and similar contamination during operation. The motor uses standard balancing to limit residual vibration when it is coupled to high-speed gearboxes or other rotating drive components. The housing finish also resists common shop-floor contaminants, which supports use in typical industrial environments.