Product Description:

The MDD093D-N-030-N2L-110PL0 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for digital drive controllers, it converts regulated electrical power into precisely timed rotational motion. In industrial automation, the unit is installed on feed axes, handling modules, and packaging stations where repeatable positioning, rapid reversals, and stable holding forces are required to shorten cycle times and maintain product quality. Its operating profile suits machines that need responsive motion, consistent speed regulation, and accurate stopping behavior during repeated cycles.

The motor provides a continuous standstill torque of 24.0 Nm, allowing the shaft to hold or accelerate moderate inertia loads without thermal overload. At rated excitation, the rotor reaches a nominal speed of 3000 rpm, so a matched controller can balance velocity with positioning accuracy during production moves. The motor seats against a centering collar that measures 110 mm in diameter, which helps maintain concentric alignment with mounting flanges or gearboxes. Power and feedback leads exit on the left side through a coded connector, helping keep cable routing clear of adjacent machine members while maintaining shielding continuity.

Control precision is supported by digital servo feedback, which returns rotor position to the drive for stable commutation and closed-loop motion control. The motor has frame length D, giving it a deeper stator stack than shorter versions in the same diameter class, and the shaft uses a keyway for secure torque transfer to the coupling. It is equipped with a shaft seal to help limit dust or coolant ingress at the shaft opening. Because the motor does not include an internal blocking brake, applications that need load holding at power-off must rely on external mechanical retention or drive-controlled holding torque.