Product Description:

The MDD093D-N-030-N2L-110PB2 is a servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it forms the rotary stage of positioning tables, pick-and-place gantries, and other automated axes where closed-loop velocity and torque control are required. When paired with a compatible controller, it supports repeatable indexing, smooth acceleration, and stable holding behavior in automated equipment. This makes the motor suitable for packaging, transfer, and handling systems that depend on accurate motion over repeated production cycles.

The motor has a centering diameter of 110 mm, allowing repeatable alignment against precision mounting fixtures. At standstill, it can supply a continuous torque of 24.0 Nm, which supports axes that must hold static loads without external gearing. During dynamic operation, the rotor reaches a nominal speed of 3000 rpm, matching common inverter outputs in packaging lines and transfer systems. For emergency stops or vertical axes, an integrated blocking brake applies 22 Nm of holding torque and engages automatically when power is removed. Standard rotor balancing limits vibration, the aluminum housing is standard for this series, and power plus feedback are routed through a sealed connector to simplify wiring.

The unit has size 093 with the longer frame code D, which provides additional copper length for higher thermal capacity. All service connections face the rear because the wiring interface is on Side B, helping keep cable routing clear on multi-axis plates. Position data is transmitted through digital servo feedback, so the host controller receives single-turn and temperature information over one cable. A factory-installed shaft seal blocks coolant or lubricant ingress along the keyed output shaft. The keyed shaft supports positive torque transmission, and the rear-facing connection arrangement reduces cable protrusion where adjacent axes are mounted close together.