Product Description:

The MDD093D-N-030-N2L-110PA0 is a synchronous servo motor produced by Bosch Rexroth Indramat in the MDD Synchronous Motors series. Intended for use with digital drive controllers, the unit converts controlled electrical power into rotary motion for indexing tables, gantry axes, and other positioning tasks in automated machinery. Synchronous motor operation allows the drive to regulate torque and speed through feedback-based control during acceleration, steady running, and stopping. This makes the motor suitable for applications that require repeatable positioning and stable motion over frequent duty cycles. Its housing, balance quality, and shaft arrangement fit servo installations that need consistent mechanical alignment.

It delivers a continuous standstill torque of 24.0 Nm, so the rotor can hold a static load while the windings remain within normal temperature limits. During motion, the motor operates at a nominal speed of 3000 rpm, which suits many transfer and positioning applications. This operating point supports responsive axis movement without requiring unusually high motor speed. A centering diameter of 110 mm helps maintain alignment between the motor and adjacent machine elements. Power, signal, and resolver connections are arranged on the A-side, which helps keep cable routing orderly in compact multi-axis layouts.

Closed-loop control is supported by integrated Digital servo feedback (DSF), which supplies position data to the drive during each control cycle. The motor is supplied without a blocking brake, so external holding force is required when an axis must remain fixed after power is removed. The 093 frame with length code D provides a longer housing and additional active material for this motor size. The output shaft uses a precision keyway for positive torque transmission to couplings or gear units. A shaft seal is also installed to help limit lubricant migration and reduce the entry of contamination from connected machine components.