Product Description:

The MDD093D-N-030-N2L-110GR2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, it supplies regulated torque and speed to indexing tables, conveyors, and forming machines in industrial automation. Its compact frame houses permanent-magnet excitation, temperature sensors, and an encoder channel so the controller can command accurate motion profiles while monitoring thermal limits. It serves as the electromechanical link between the drive electronics and the driven load.

At standstill, the motor delivers a continuous torque of 24.0 Nm, allowing stable position holding during loaded operation. Once energized, it can reach a nominal speed of 3000 rpm, which suits the operating range of standard Indramat inverters. An integrated blocking brake provides 22 Nm of holding torque to secure vertical axes when power is removed. A shaft seal helps prevent lubricant migration along the plain shaft. Cables connect through a connection on the right side with a keyed circular connector, which helps with cable routing in crowded cabinets. Position and velocity are reported through digital servo feedback, allowing the controller to maintain tight speed regulation and accurate motion response.

A centering pilot of 110 mm aligns the flange with gearboxes or machine plates and supports accurate mounting. The stator body uses length code D, which provides more winding volume than shorter versions while keeping the same outside diameter. Within that housing diameter, the rotor corresponds to size 093, giving inertia suitable for medium-mass loads driven by high-dynamic controllers. The housing is supplied in the standard form, and the plain shaft on side A supports common coupling arrangements. The motor follows established MDD geometry, so it fits applications that need a compact servo package with integrated brake and feedback hardware.