MDD093D-N-020-N2M-130PL1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
38 Seconds
The Bosch Rexroth Indramat MDD093D-N-020-N2M-130PL1 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. It features a nominal speed of 2000 min⁻¹, a centering diameter of 130 mm, and produces a continuous torque at standstill of 24.0 Nm. This motor is equipped with an integrated multiturn absolute encoder, a blocking brake providing 11 Nm holding torque, and comes with a keyway shaft type and shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-020-N2M-130PL1 is a synchronous servo motor built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it is installed on production axes to convert commanded current into precise rotary motion for indexing tables, gantry joints, or packaging spindles where closed-loop speed and position control are required. The motor has frame size 093 and length code D, giving it a footprint suited to medium-duty servo axes. Its synchronous operating principle supports stable torque production during repeated start-stop cycles in automated equipment.
This model delivers a continuous standstill torque of 24.0 Nm, allowing mechanical loads to remain stationary without extra cooling. Under rated excitation, it reaches a nominal speed of 2000 rpm, matching drives that operate at moderate line frequencies while maintaining magnetic synchronism. Mounting is centered by a 130 mm pilot diameter that mates to gearboxes or machine frames with standard balancing to reduce residual vibration. Power and feedback conductors exit on the left side through a sealed connector, which simplifies routing when cable chains run along the machine's fixed side. The output shaft uses a keyway so couplings can transfer torque without slippage, and the single-ended layout saves axial space for adjacent components.
Dynamic holding capability is provided by an internal brake that produces 11 Nm of holding torque, keeping vertical or suspended loads in place when mains power is removed. Position information is generated by an integrated multiturn absolute encoder and returned to the controller over digital servo feedback (DSF), supporting multi-axis synchronization without separate datum routines. This feedback arrangement allows the control system to retain position information across power cycles and respond quickly to commanded motion changes. The standard housing encloses the windings behind a fitted shaft seal, helping protect internal parts from splash and airborne particulates.
Frequently Asked Questions about MDD093D-N-020-N2M-130PL1:
Q: What type of encoder is used in the MDD093D-N-020-N2M-130PL1 motor?
A: This model comes with an integrated multiturn absolute encoder.
Q: What is the holding brake torque rating for the MDD093D-N-020-N2M-130PL1?
A: The holding brake on this motor delivers a torque of 11 Nm.
Q: What shaft features are included in the MDD093D-N-020-N2M-130PL1 motor?
A: A keyway shaft configuration is provided with a shaft seal for added protection.
Q: What is the continuous standstill torque provided by the MDD093D-N-020-N2M-130PL1?
A: The continuous torque at standstill for this motor is rated at 24.0 Nm.
Q: How does the MDD093D-N-020-N2M-130PL1 connect electrically?
A: The connection direction for this motor is on the left side with a connector interface.
