Product Description:

The MDD093D-N-020-N2M-130PL0 is a three-phase synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts commanded current from the drive into torque and precise motion for industrial automation axes such as gantries, packaging stations, and transfer modules. Its synchronous design supports stable speed control and accurate positioning during repeated machine cycles. This makes the motor suitable for applications that require coordinated movement and consistent response under changing load conditions.

At the mechanical interface, the centering pilot has a diameter of 130 mm, allowing alignment with gearboxes or machine frames while the standard balancing grade keeps vibration within limits. The rotor can maintain 24.0 Nm of continuous torque at standstill, so holding loads during dwell periods does not cause thermal overload. During operation, it reaches a nominal speed of 2000 rpm. That speed suits many servo applications that need controlled acceleration and steady running performance. Position data are returned through digital servo feedback (DSF) generated by an integrated multiturn absolute encoder, giving the controller position information over multiple shaft revolutions. Power is transmitted through a shaft machined with a keyway, which helps prevent slippage between the motor and the driven element. The D length code indicates an extended stator stack within the 093 frame, which increases rated torque without enlarging the mounting footprint.

Electrical and signal terminations are made on the left, and a single connector carries both power and feedback conductors to simplify routing in cabinets. The motor is supplied without a blocking brake, so vertical loads must be secured by drive torque or an external lock when power is removed. A shaft seal limits contaminant ingress along the output shaft, and the standard shaft end without a side-B extension helps keep the package short for close-coupled installations. The compact connection layout also helps the motor fit more easily where adjacent machine components leave limited clearance around the housing.