Product Description:

The MDD093D-N-020-N2M-130PB2 is a brushless servo unit manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts drive current into precise rotational motion needed for coordinated axes on packaging lines, transfer stations, and other automated equipment. Integrated feedback and braking functions allow the machine controller to start, stop, and hold position without requiring separate external components, making this model a compact actuation component for industrial automation.

With a continuous standstill torque of 24.0 Nm, the motor can sustain static loads without overheating. Its nominal speed of 2000 rpm establishes the rated operating velocity used by the drive for motion control. The integrated blocking brake provides 22 Nm of holding torque to secure vertical axes when power is removed. A centering diameter of 130 mm aligns the flange concentrically with gearboxes or machine frames, and the embedded Digital servo feedback (DSF) channel returns rotor position data to the controller. Standard dynamic balancing limits vibration, the housing uses a standard closed frame, and an integrated multi-turn absolute encoder removes the need for external homing switches.

Electrical and signal conductors exit on side B through a single connector, simplifying cabinet routing and helping keep contamination away from the feedback devices. The motor uses frame size 093 with length code D, so the longer stator stack increases continuous output without changing the mounting hole pattern. The shaft has a keyway for secure coupling, and a shaft seal helps block coolant or dust from entering the front bearing. The shaft end is supplied in the standard form without an auxiliary rear extension, which supports direct coupling to gear-driven loads while keeping the overall arrangement straightforward.