Product Description:

The MDD093D-N-020-N2M-130PB1 is a synchronous AC servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it delivers closed-loop motion in automated machinery by converting electrical energy into controlled rotary output. This makes it suitable for packaging lines, gantries, and similar industrial equipment that require repeatable positioning and stable speed control. The 093 frame size with a D-length stator gives the motor a compact profile while still supporting medium-duty torque demands. The motor is intended for servo axes that must start, stop, and reverse with predictable response under changing process loads.

Mechanical mounting uses a centering shoulder diameter of 130 mm, which helps align the motor accurately with the mating flange. When held stationary, the motor can generate 24.0 Nm of continuous torque for sustained loading. Rated speed is 2000 rpm, which provides a practical operating point for many servo axes. An integrated blocking brake supplies 11 Nm of holding torque when the drive is disabled. Power and feedback leads exit on Side B through a connector, which supports clean cable routing and avoids hard-wired terminations.

Position information is provided by an integrated multi-turn absolute encoder that communicates through digital servo feedback (DSF) channels, so the control system retains position data after power loss. The output uses a keyway shaft with a shaft seal to support positive torque transmission while helping block dust and coolant ingress. Standard balancing helps limit vibration during operation, and the motor has a single shaft end on the drive side rather than a second shaft at the opposite end. Because feedback and brake functions are integrated into the housing, external components around the motor can be kept to a minimum. This layout keeps the coupling arrangement straightforward.