Product Description:

The MDD093D-N-020-N2M-130PA0 is a synchronous servo motor built by Bosch Rexroth Indramat for use with digital drive controllers in the MDD Synchronous Motors series. It converts electrical command signals into controlled rotary motion for machinery axes that require repeatable positioning and stable speed control. The D length code and 093 frame size indicate the active stack and motor diameter, while the standard housing and balancing support installation on common automation equipment. Its enclosed design keeps the motor compact and suitable for machines where mounting space and cable routing must remain orderly.

The motor delivers a continuous standstill torque of 24.0 Nm, which allows it to hold or position loads without external gearing in many axis arrangements. Its rated speed is 2000 rpm, giving the connected drive a moderate operating range for indexing, feed motion, and steady running. A 130 mm centering diameter helps align the stator accurately with a gearbox or machine adapter during mounting. Power, feedback, and brake leads exit on side A through a connector, which keeps cable entry concentrated at one end of the motor. Rotor position is monitored by an integrated multi-turn absolute encoder, and digital servo feedback sends that information to the controller for closed-loop operation.

The output end is equipped with a shaft seal, which helps keep lubricants inside the bearing area and improves resistance to splash exposure. Torque is transferred through a keyway shaft, providing a positive mechanical connection for pulleys, couplings, or similar drive elements. The motor is supplied without a blocking brake, so any holding function at standstill must be provided by drive torque or an external mechanical lock. The opposite shaft end remains closed, and the internal feedback electronics are contained within the housing so the motor keeps a clean external form for installation.