MDD093D-N-020-N2M-130GL1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
2 Seconds
The Bosch Rexroth Indramat MDD093D-N-020-N2M-130GL1 is a motor in the MDD Synchronous Motors series designed for digital drive controllers. It features an integrated multiturn absolute encoder and provides a continuous torque at standstill of 24.0 Nm. This motor has a centering diameter of 130 mm and comes with a plain shaft and blocking brake offering 11 Nm of holding torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-020-N2M-130GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it is intended to furnish precise rotary motion to automated axes that rely on closed-loop speed and position control. Its D-length housing and 093 frame size place it in the mid-torque class, while the standard housing and connector interface support straightforward installation in industrial enclosures. This configuration is suited to positioning and feed applications that require repeatable motion with compact mounting dimensions.
The motor can generate a continuous standstill torque of 24.0 Nm, allowing it to hold loads without overheating when the shaft is motionless. Under rated excitation, it reaches a nominal speed of 2000 rpm, matching drive systems that operate at moderate spindle or feed velocities. Rotor position is reported through an integrated multi-turn absolute encoder, and velocity loops are closed using digital servo feedback (DSF). These feedback elements allow the connected drive to monitor position and speed without external measuring devices. Mechanical vibration is minimized by standard balancing, so the motor can couple to precision gearboxes without additional trim. A single connector carries both power and feedback, and the design omits a side-B shaft end to reduce overhang mass.
A centering pilot diameter of 130 mm simplifies concentric mounting to flanges or machine frames. The power and feedback plugs use a left-side connection, which can simplify cable routing in cabinets laid out for mirrored drives. An internal blocking brake supplies 11 Nm of static holding torque, helping prevent drift on vertical axes when the motor is not energized. The motor includes a shaft seal that limits lubricant migration, and the plain shaft profile supports rigid coupling hubs. It has a standard housing finish and a plain shaft end without a side-B extension, which helps keep the rear profile compact.
Frequently Asked Questions about MDD093D-N-020-N2M-130GL1:
Q: What type of shaft is included on the MDD093D-N-020-N2M-130GL1 motor?
A: The shaft end of this motor is a standard plain shaft without a side B shaft end.
Q: What kind of encoder is used in the MDD093D-N-020-N2M-130GL1 motor?
A: This model incorporates an integrated multiturn absolute encoder for advanced position tracking.
Q: What is the continuous torque at standstill for this motor?
A: The MDD093D-N-020-N2M-130GL1 provides a continuous torque of 24.0 Nm at standstill, suitable for stable operations.
Q: Does the MDD093D-N-020-N2M-130GL1 motor include a holding brake and what is its torque?
A: A blocking brake is included on this motor, delivering a holding brake torque of 11 Nm.
Q: What type of motor feedback does the MDD093D-N-020-N2M-130GL1 offer?
A: This motor is equipped with digital servo feedback (DSF) for precise motor performance monitoring.
