Product Description:

The MDD093D-N-020-N2M-130GL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for use with digital drive controllers, the motor supplies regulated mechanical power to indexing stations, handling arms, and other automation axes that rely on consistent velocity and position control. Its integrated thermal monitoring, mechanical interfaces, and feedback hardware support closed-loop motion without requiring many external add-ons. This layout helps the motor respond predictably during repeated acceleration, deceleration, and dwell periods in automated equipment.

The motor can hold static loads continuously with a torque of 24.0 Nm, a rating that supports steady operation at standstill or low speed. Under normal operating conditions, it reaches a nominal rotational speed of 2000 rpm, matching common controller ranges for medium-speed machinery. Precise concentric alignment is supported by a centering diameter of 130 mm, which helps reduce shaft runout during assembly. All power and feedback conductors exit on the left side through a single connector, simplifying cable routing in restricted enclosures. Motion data is returned to the controller via digital servo feedback (DSF), allowing high-resolution current loops and responsive correction during load changes.

An integrated multiturn absolute encoder tracks rotor angle across multiple revolutions, preserving true position after power loss and removing the need for a homing routine at startup. The output interface is a plain shaft, which provides a smooth surface for standard clamping hubs and gearbox inputs. The housing is supplied with a shaft seal, helping keep lubricants inside while reducing the entry of dust and moisture. The motor is supplied without a blocking brake, so any holding force during downtime must come from the drive or from external axis hardware. This configuration is suited to applications where low added inertia and free shaft rotation are preferred.