Product Description:

The MDD093D-N-020-N2M-130GA2 belongs to the MDD Synchronous Motors series manufactured by Bosch Rexroth Indramat. It is designed for use with digital drive controllers and supplies controlled rotary motion in automated equipment such as positioning axes, transfer units, and feed systems. An integrated encoder allows the drive to monitor shaft position during operation, helping the system maintain accurate speed and position control. The motor is balanced to a standard grade, uses a standard housing, and has a plain shaft with a single shaft end, so the opposite end remains closed.

At standstill, the motor can deliver a continuous torque of 24.0 Nm, allowing it to hold a load without excessive heat buildup. Under rated excitation, it reaches a nominal speed of 2000 rpm, which suits general industrial motion tasks that require stable operating velocity. Mechanical alignment is supported by a centering diameter of 130 mm, which helps position the motor accurately against the mating machine surface. All power and feedback conductors exit on Side A through a sealed connector that keeps wiring compact. The motor has frame length D and frame size 093, which establish the overall envelope and support the thermal capacity expected for this model. A shaft seal helps keep dust and oil away from internal components.

The integrated blocking brake provides 22 Nm of holding torque, which helps keep a vertical or suspended axis in place when drive power is removed. Position data come from an integrated multiturn absolute encoder, so the controller can retain position information across multiple shaft revolutions. That signal is transmitted through digital servo feedback (DSF) for closed-loop speed and position control. The standard housing supports straightforward mechanical installation, and the plain shaft can be connected to suitable couplings in applications that do not require a keyed shaft.