Product Description:

The MDD093D-N-020-N2M-110PR1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into regulated torque for axes that require accurate position and velocity control in automated machinery. This role suits feed axes, transfer units, and other motion systems that depend on repeatable servo response under changing loads. The unit falls into motor size 093 and uses a standard housing and balancing arrangement, giving it a familiar mechanical envelope for machine layouts that already accommodate this frame.

At standstill, the motor can deliver a continuous torque of 24.0 Nm, supporting low-speed holding duty without overstressing the windings. When energized by the drive, the rotor reaches a nominal speed of 2000 rpm, which fits machine axes that favor higher force at moderate rotational speed. The centering diameter is 110 mm, so the flange seats directly into precision mounting plates without additional sleeves. Power and feedback leads exit on the right side, and terminations are made through a single connector. This layout keeps the connection point concentrated at one end of the motor and helps simplify cable routing in compact assemblies. The D length code indicates a longer active stack, which provides the magnetic volume needed for this output class while preserving the 093 frame outline.

The motor is supplied with a blocking brake that applies 11 Nm of static torque to hold loads when power is removed. Position data returns to the controller through digital servo feedback, and rotor angle is measured by an integrated multi-turn absolute encoder, so the axis can retain position information after shutdown. Torque is transmitted through a shaft with a keyway and a shaft seal that helps limit oil or coolant ingress. The single-ended shaft arrangement and balanced rotor support stable running across the speed range expected in digitally controlled servo applications.