MDD093D-N-020-N2M-110PA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
9 Seconds
The Bosch Rexroth Indramat MDD093D-N-020-N2M-110PA2 is part of the MDD Synchronous Motors series and features a standard 110 mm centering diameter with a keyway shaft. It provides 24 Nm of continuous torque at standstill and is equipped with a blocking brake rated at 22 Nm holding torque. This motor uses a digital servo feedback system and comes with an integrated multiturn absolute encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-020-N2M-110PA2 is a servo motor built by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. It is intended for use with digital drive controllers and generates regulated torque and speed in automated machinery. The unit uses a standard housing and standard rotor balancing, and its D-length frame in the 093 size class provides a larger active stack than shorter frame lengths in the same platform. A standard shaft end on the drive side simplifies coupling, while the absence of a shaft extension on side B keeps the envelope compact for cabinet or axis-mounted installations. This arrangement suits positioning axes, feed drives, and other servo applications that need repeatable response under changing load conditions.
The motor produces a continuous torque of 24.0 Nm at standstill and can reach a nominal speed of 2000 rpm, allowing direct drive of moderate-inertia loads without gear reduction. A blocking brake is fitted and can hold up to 22 Nm when power is removed, which helps prevent uncommanded motion on vertical axes. Mechanical centering is handled by a 110 mm pilot diameter, and the mounting holes reference this surface to maintain coaxial alignment. Power and feedback lines exit on side A, so cable runs remain on the same face as the system connectors. The same-side cable exit also helps keep moving cable loops away from the non-drive end of the motor, and a molded connector plug completes the electrical interface for the unit.
Position data are supplied by an integrated multi-turn absolute encoder, and signal transmission to the controller uses digital servo feedback (DSF) to support high-resolution closed-loop control. This feedback arrangement gives the controller precise rotor position information during startup and normal operation. The output shaft uses a keyway profile to prevent slip under repetitive load reversals, while a factory-installed shaft seal helps block coolant or cutting fluid from migrating along the journal into the stator cavity. A standard housing finish, motor length code D, and the connector style make up the N2M interface code used for this motor.
Frequently Asked Questions about MDD093D-N-020-N2M-110PA2:
Q: What type of encoder is included with the MDD093D-N-020-N2M-110PA2 motor?
A: The MDD093D-N-020-N2M-110PA2 motor features an integrated multiturn absolute encoder for position feedback.
Q: What is the continuous torque at standstill for the MDD093D-N-020-N2M-110PA2?
A: This model provides a continuous torque at standstill of 24.0 Nm.
Q: Does the MDD093D-N-020-N2M-110PA2 motor have a holding brake and what is its torque?
A: The MDD093D-N-020-N2M-110PA2 includes a blocking brake with a holding brake torque of 22 Nm.
Q: What is the nominal speed of the MDD093D-N-020-N2M-110PA2 synchronous motor?
A: The nominal speed for this motor is specified at 2000 min⁻¹.
Q: What type of shaft configuration does the MDD093D-N-020-N2M-110PA2 feature?
A: A keyway shaft with a shaft seal is provided on this model for reliable mechanical coupling and protection against contaminants.
