Product Description:

The MDD093D-N-020-N2M-110GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat and supplied as part of the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts electrical control commands into regulated mechanical rotation for positioning, conveying, and machining axes in automated systems. This type of integrated servo motor is commonly used where a drive must manage speed, torque, and position with repeatable response during frequent starts and stops. It is suitable for feed axes, transfer stations, and similar motion points that require predictable servo response.

A continuous stall torque of 24.0 Nm allows the motor to hold or slowly accelerate loads without exceeding thermal limits during low-speed operation. Its nominal operating speed of 2000 rpm sets the rated velocity range that the drive can maintain under steady load, which suits general-purpose servo axes rather than high-speed spindle duty. The centering pilot measures 110 mm for flange alignment, and the power and feedback plugs are oriented to the left side to support compact cable routing in crowded machine spaces. A plain shaft transmits torque directly to couplings or gearboxes, and the integrated blocking brake provides 11 Nm of static holding force when power is removed.

Closed-loop accuracy is supplied by an integrated multiturn absolute encoder, allowing the drive to track shaft position across multiple revolutions and resume operation after power cycles without losing absolute position information. Position data is returned through digital servo feedback, which avoids analog drift and supports stable matching with compatible Rexroth controllers during speed and position control. A factory-installed shaft seal helps keep lubricants or cutting fluids out of the bearing area, supporting reliable operation during repeated motion and stop cycles in enclosed industrial equipment.