Product Description:

The MDD093D-N-020-N2M-110GA0 is a synchronous servo motor from Bosch Rexroth Indramat in the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it supplies controlled torque and speed for positioning tasks on machining centers, packaging lines, and automated transfer systems. In operation, the motor converts commanded three-phase AC power into precise mechanical rotation so machine axes can follow programmed motion paths with stable response. It is commonly used where accurate axis synchronization and smooth low-speed behavior are required.

The motor produces a continuous standstill torque of 24.0 Nm, which supports load holding at zero speed during controlled operation. Under rated electrical conditions, it reaches a nominal speed of 2000 rpm, allowing the connected mechanism to run at a steady operating velocity without exceeding normal thermal limits. A centering flange of 110 mm helps align the motor accurately with machine interfaces and gear units. The rotor is balanced to a standard grade to reduce vibration through its normal speed range. Power and feedback conductors exit on Side A through a plug-in Connector, which keeps the electrical connection compact and supports orderly cable routing.

An Integrated multiturn absolute encoder monitors shaft position over multiple revolutions, and Digital servo feedback (DSF) passes that information to the drive for fast closed-loop control. This feedback arrangement supports position monitoring immediately after startup and during repeated indexing moves. The motor uses a Plain shaft with a shaft seal, making it suitable for keyless compression couplings while helping protect the bearing area from contamination. Because it is supplied without a blocking brake, holding force during power loss must come from an external brake or from controlled drive torque where the application allows it. The motor also uses a D-length stator stack and a standard housing, which match the mechanical layout of this frame size.