Product Description:

The MDD093D-N-020-N2L-130PR2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for use with digital drive controllers in automated machinery. As a member of the MDD Synchronous Motors series, it converts commanded current into rotational motion for positioning axes, feed drives, or material-handling stations where closed-loop accuracy and repeatable torque are required. It is suited for applications that need stable motion control during repeated starts, stops, and direction changes. In these systems, the motor works with the connected drive to keep speed and position closely matched to the command signal.

This model delivers a continuous standstill torque of 24.0 Nm, allowing the motor to hold load at zero speed without overheating during normal operation. Its nominal operating speed is 2000 rpm, which suits moderate-speed processes that still require precise servo response. A centering diameter of 130 mm helps align the flange accurately during mounting so the motor seats correctly on the machine interface. Power and feedback conductors exit on the right side, which can simplify cable routing when several axes are installed along the same machine bed. Position data is returned through digital servo feedback (DSF), allowing the controller to correct for load changes and maintain accurate motion during operation.

An integrated blocking brake supplies 22 Nm of holding torque during power-off conditions, which helps prevent downward drift on vertical axes. The output shaft uses a keyway for positive engagement with standard pulleys or couplings. The motor also has a shaft seal that helps limit the entry of contaminants and reduces lubricant migration near the shaft opening. Electrical termination is completed through a sealed connector, so the cable connection remains enclosed during operation. This arrangement supports straightforward cable attachment while keeping the stator enclosure closed.