Product Description:

The MDD093D-N-020-N2L-130PL1 is a synchronous servo motor built by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. It is intended to drive rotary axes through digital drive controllers where precise torque regulation and closed-loop position feedback are required in industrial automation. This type of motor is well suited for positioning, indexing, and controlled speed changes in machines that need repeatable motion under changing load conditions. It can be paired with servo drives that monitor current, speed, and position continuously during operation.

This model can sustain a continuous standstill torque of 24.0 Nm, giving it the ability to hold static loads without overheating while control loops remain active. Its rated speed is 2000 rpm, matching motion tasks that blend moderate velocity with high torque density. The centering pilot measures 130 mm, a dimension that keeps the flange concentric with attached machine elements. Position and velocity data are returned through Digital servo feedback (DSF), allowing the drive to correct errors during each control cycle. Power, brake, and sensor leads exit on the left side, which can simplify routing where cable space is limited on one side of the machine. A keyed connector provides a secure plug-in connection for the motor wiring.

The integrated brake provides 11 Nm of static holding force, so suspended or vertical loads stay fixed during power loss. A keyway shaft transmits torque without relying only on friction at the coupling. The front bearing is protected by a shaft seal that keeps lubricant in place and helps block dust and airborne contamination. Dynamic balance uses the standard grade to limit vibration, and the housing uses the standard version for compatibility with existing mounts. Length code D gives the motor a longer body, while size code 093 identifies the frame geometry used by this model.