Product Description:

The MDD093D-N-020-N2L-130GR1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts controlled electrical power into regulated mechanical rotation for positioning and speed control in industrial automation. In gantries, machine tools, and packaging lines, the motor supplies commanded torque while returning operating data through its integrated feedback channel. Because the motor is designed for servo duty, the controller can correct speed and position errors in real time instead of relying on open-loop operation. That behavior is useful on axes that must accelerate, dwell, and reverse without losing tracking accuracy.

The motor delivers a continuous standstill torque of 24.0 Nm, allowing it to support static loads without overheating. Under drive command, it reaches a nominal speed of 2000 rpm. An internal blocking brake provides 11 Nm of holding torque during stopped conditions. Position data are transmitted through digital servo feedback (DSF) for precise control. Wiring is handled by a sealed connector for power and signal connections. The output uses a plain shaft suited to couplings or pulleys, and the D-length stator gives the motor a longer active stack than shorter versions. The brake can hold the axis at rest when drive power is removed, while the shaft form supports direct coupling to common transmission elements.

Mounting accuracy is supported by a centering pilot of 130 mm, which helps align the flange with the adjoining machine surface. All electrical and feedback connections are oriented on the right side, which can simplify cable routing in side-entry layouts. A shaft seal is fitted at the drive end to help keep contaminants away from the shaft area. This layout leaves the non-drive end clear for surrounding machine parts and nearby cable runs.