Product Description:

The MDD093D-N-020-N2L-130GR0 synchronous motor is produced by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where commanded electrical output is converted into precise rotary motion for packaging equipment, transfer systems, and other automated axes. Its electromagnetic layout supports stable torque production during acceleration, steady-state running, and repeated positioning moves. Closed-loop operation lets the connected drive correct speed and position deviations as the load changes during normal machine cycles.

The motor can hold a load at standstill with 24.0 Nm of continuous torque, allowing high-inertia tooling to remain in position without additional mechanical restraints in some applications. During dynamic operation, it reaches a nominal speed of 2000 rpm, matching servo drives that supply the required electrical frequency. Mechanical alignment during mounting is simplified by a centering diameter of 130 mm, which fits common flange interfaces on machine frames and geared attachments. All power and signal leads exit on the right side through an integrated connector system, which keeps cable routing compact and supports shielded connections. For positional accuracy, the rotor is monitored through digital servo feedback, allowing the controller to correct velocity and phase error within each control cycle.

A standard-balanced rotor works with the standard housing to help limit vibration through the operating range of this frame length D motor. The output uses a plain shaft with a shaft seal, which supports direct coupling while helping limit lubricant migration and the entry of airborne particles. Because the motor is supplied without a blocking brake, static holding force must be provided by drive torque or an external clamp when the application requires the axis to stay fixed at rest. The single-ended shaft arrangement leaves side B closed, which helps preserve installation depth and protects the feedback components at the opposite end.