Product Description:

The MDD093D-N-020-N2L-130GB2 is a three-phase synchronous servo motor manufactured for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts commanded current into controlled rotary motion for positioning axes, pick-and-place heads, and other precision tasks in industrial automation. This motor format is well suited to applications that need repeatable motion, stable torque response, and compact installation in enclosed machine spaces.

At standstill, the motor can supply 24.0 Nm of continuous torque, giving the axis steady holding capability without excessive thermal stress. Under dynamic load, its nominal speed reaches 2000 rpm, which suits medium-speed processes that do not require additional gearing for normal operation. A built-in blocking brake provides 22 Nm of static torque to hold the shaft during power loss or emergency stops. Accurate mounting is supported by a 130 mm centering diameter, and position information is returned through digital servo feedback (DSF) for closed-loop speed and torque regulation. The longer lamination stack associated with length code D increases the active iron length, and the housing and balancing follow the standard grade used across the series.

Cabling exits from the rear because the power and feedback connections are mounted on side B of the stator. A keyed industrial connector interface supports fast installation and avoids the need to rewire conduit when the motor is removed. Frame size 093 sets the outside dimensions to match common mounting flanges and compatible gearheads. The drive end uses a plain shaft, and the installed shaft seal helps keep coolant or lubricant out of the bearing chamber. The opposite face has no second shaft extension, which saves space around the machine frame. Standard balancing and the single-ended shaft arrangement help the motor run smoothly while allowing coupling to belt pulleys, rigid clamps, or backlash-free collars.