Product Description:

The MDD093D-N-020-N2L-130GA2 is a synchronous AC servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It works with digital drive controllers to convert commanded current into precise rotary motion for conveyors, handling modules, and tooling axes. The unit is intended for medium-frame applications that need stable torque, integrated feedback, and a built-in holding brake in a compact housing. This combination supports controlled motion where repeatable speed regulation and accurate positioning are required during frequent starts, stops, and load changes.

It delivers a continuous standstill torque of 24.0 Nm, so the drive can hold or move a load at low speed without excessive heating. The motor reaches a nominal speed of 2000 rpm, which suits applications that need steady operation across a moderate speed range. A centering diameter of 130 mm provides accurate alignment at the mounting interface, helping the motor seat correctly on the machine face. Position and speed are returned through Digital servo feedback (DSF), allowing the controller to correct current during each commutation cycle, and the integrated brake provides 22 Nm of holding torque for stopping or securing the axis when power is removed.

Electrical and signal leads exit on Side A, which helps keep cable routing organized when the motor is installed in compact machine spaces. The power terminations use a single industrial Connector, so the external connection stays compact and secure. Mechanical output is provided through a Plain shaft, which suits friction-fit hubs or shrink disks and avoids backlash associated with keyed shaft connections. The shaft is supplied with a shaft seal, helping limit lubricant migration and ambient moisture at the bearing journal during long operating periods.