Product Description:

The MDD093D-N-020-N2L-130GA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. It is used with digital drive controllers and converts commanded current into rotary motion for positioning and velocity tasks in automated machinery. As a member of the 093 frame size family, it provides the torque density needed for mid-range axes in packaging lines, material-handling gantries, and general machine-tool feeds.

The motor delivers a continuous standstill torque of 24.0 Nm, so it can hold a load at zero speed without overheating when rated current is applied. During motion, the rotor reaches a nominal speed of 2000 rpm, which suits common drive controller output ranges. Position feedback is generated by a digital servo feedback system, giving the controller high-resolution incremental and absolute data for closed-loop regulation. Precise mechanical location is supported by a centering diameter of 130 mm, which matches standard flange patterns and helps maintain concentric mounting on gearboxes or machine frames. The motor also has standard dynamic balancing, a standard housing, and a connector-style power interface.

The blocking brake provides 11 Nm of holding torque to secure vertical or overhung loads when power is removed. Brake and motor connections are routed on side A of the stator housing, which keeps cable routing compact. The output uses a plain shaft with a fitted shaft seal, helping prevent lubricant migration into the motor while allowing direct coupling to clamping hubs or shrink discs. Length code D indicates an extended active lamination stack that increases peak torque without changing the external diameter. The motor also uses a standard housing finish and a DSF interface for connection to compatible digital drives through the specified connector type.