Product Description:

The MDD093D-N-020-N2L-110PR2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It serves as the rotary actuator that interfaces with digital drive controllers, converting commanded current into controlled torque and speed for automated equipment. In an industrial cell, the unit provides closed-loop motion on axes used in pick-and-place gantries, forming presses, and material-handling stations, linking the controller power stage to the mechanical load. This arrangement allows the motor to deliver repeatable motion where accurate speed regulation and positional response are required.

At a nominal speed of 2000 rpm, the rotor reaches the rated synchronous velocity coordinated with the drive output. When locked in place, the stator can supply a continuous torque of 24.0 Nm, maintaining force for tensioning or indexing duties. Length code D indicates the longest stack in the 93 mm frame, which increases magnetic flux and supports higher torque than shorter stack lengths. An integrated blocking brake delivers 22 Nm of static holding torque so vertical loads stay secure after power is removed. Position data is returned through digital servo feedback, supporting tight interpolation and rapid error correction. The 093 frame size standardizes flange geometry, while the 110 mm centering diameter supports accurate concentric mounting. Standard balancing helps reduce vibration, and the power and feedback connections exit on the right side of the housing for straightforward cable routing.

The motor uses a standard housing that protects the windings while keeping mass suitable for moving axes. Power and feedback terminations are handled through a detachable connector, and a shaft seal helps block coolant or dust at the output end. The single output shaft uses a keyway for positive torque transmission. The design omits a side-B shaft, which helps reduce rotational inertia. Classified as a motor for digital drive controllers, it is intended for use with compatible Rexroth inverter modules in automated production systems.