Product Description:

The MDD093D-N-020-N2L-110PB0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it supplies torque and position control to automated axes in packaging, material-handling, and assembly equipment where closed-loop performance is required. Because it is intended for digital drive controllers, the motor works in systems where current, speed, and position loops are coordinated by the connected servo electronics. This makes it suitable for indexing tables, transfer units, and other machine axes that require repeatable motion under changing loads.

At standstill the motor can deliver a continuous torque of 24.0 Nm, allowing stable holding force without additional cooling. Under rated operating conditions it reaches a nominal speed of 2000 rpm, matching drive modules used for medium-speed servo operation. The motor has a size code of 093 and length code D, and it uses a mounting pilot of 110 mm to keep the stator concentric with the machine frame. The output shaft uses a keyway for positive torque transmission to pulleys or couplings. The housing uses a standard uncooled design, and there is no integrated blocking brake, so external means must secure vertical loads when power is removed.

Power and feedback conductors exit on the rear because the connection side is Side B, and a circular connector is used to simplify installation. A shaft seal is fitted to limit the ingress of emulsions or dust toward the bearings. Position data are returned through digital servo feedback (DSF), allowing the drive controller to process high-resolution incremental counts without additional transducers. The rotor uses standard balancing, so ISO grade G 2.5 vibration limits are met when factory-specified couplings are used. The unit retains a single-ended shaft configuration on side A only, and its housing uses the same paint and corrosion protection as other motors in this series.