Product Description:

The MDD093D-N-020-N2L-110GR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts commanded current into controlled rotary motion for automated axes in packaging lines, gantry systems, and general material-handling stations. By coupling directly to the mechanical load, the unit delivers programmable torque and velocity for closed-loop positioning tasks in industrial automation. Its operating profile suits applications that need repeatable motion with stable response during acceleration, deceleration, and holding periods.

At standstill, the motor sustains a continuous torque of 24.0 Nm, allowing the axis to hold its load without additional clamping devices. Under rated electrical excitation, it attains a nominal speed of 2000 rpm, supporting applications that require moderate throughput with high repeatability. Precise motion control is supported by digital servo feedback, which transmits position data to the drive for regulated operation. The centering flange diameter of 110 mm aligns the frame with standard gear reducers and mounting plates. All power and feedback conductors leave the housing on the right because the connection hardware is a sealed connector positioned on that side, which can simplify cable routing when the motor is installed on a machine's left frame plate.

A plain shaft with a factory-installed shaft seal protects the coupling interface from lubricant splash and airborne particles. The rotor uses Standard balancing, which helps limit vibration as the frame size of 093 reaches operating speed. For systems that rely on external holding devices, the motor is supplied without a blocking brake. The housing uses the standard uncooled design, and there is no shaft on side B. The D length code gives the motor an extended magnetic stack while preserving the original mounting pattern.